Redexim
17
10.
MAINTENANCE
Time schedule
Check / Grease point
Method
Before
every
use
Check for loose bolts / nuts.
Tighten loose bolts / nuts with the
correct tightening moment.
Presence and readability of the
safety stickers
Replace these if not present or
damaged.
After
every
use
Clean the machine.
Only use air to clean the machine. Do
NOT use water.
After the
first
20 working
hours (new or repaired)
Check for loose bolts / nuts.
Tighten loose bolts / nuts with the
correct tightening moment.
Provide the lubrication points with
grease.
Use EP2 grease
1 shot
Check whether the drive chains are
greased adequately.
Grease the drive chains.
After
every
100 hours
Check whether there is sufficient
grease in the gearbox.
Fill the gearbox with 2.8 litres of EP0
grease.
Check whether the drive chains are
greased adequately.
Grease the drive chains.
Check whether the hopper is clean.
Clean the hopper.
Provide the lubrication points with
grease.
Use EP2 grease
Table 7
10.1. Lubrication points
To guarantee the proper functioning of the Speedseed, the lubrication points at both sides of the
machine (see Figure 6) must be greased periodically. Grease these points according to Table 7.
Figure 6
