- 4 -
DS3100
SAFETY PROVISIONS
RINK Disk Spreader DS3100
is designed exclusively for spreading fine-grained loose
grit such as sand, gravel, granulate and similar materials.
Any use which goes beyond these limits is not regarded as intended use. The
manufacturer shall not be held liable for damages resulting from unintended use. The risk
shall be carried by the operator alone.
The intended use also includes observation of operation, maintenance and service
conditions specified by the manufacturer.
RINK Disk Spreader DS3100
has been produced according to the state of the art in this
field and is reliable; however, operating the
RINK Disk Spreader DS3100
may be
dangerous for the life and health of the operator and other people, unless it is used,
serviced and repaired by the persons, who are familiar with the machine and advised
about the dangers.
Every person entrusted in the operator's company with operation, servicing and repairs of
the spreader has to read and understand the operating instructions, in particular, the
Safety Provisions
chapter.
Use only
original spare parts from the manufacturer
when making repairs.
Along with the hints in these operating instructions, generally acknowledged
safety and
accident prevention rules
shall be adhered to.
When using public roads adhere to applicable traffic rules (StVZO).
The spreader may only be used on the public roads after successful registration. Full
conclusion of TÜV (German Technical Inspection Agency) and necessary additional
safety devices (lighting system, wheel chocks)# are available at customer's request.
Transport of people is prohibited!
It is prohibited to enter the loading bridge when the spreader system is running
. A
corresponding instruction is stuck onto mudguards on both sides of the
RINK Disk
Spreader DS3100
. This instruction should always remain readable and replaced if
damaged.
The operator is
obliged
to check the RINK Disk Spreader DS3100
for
signs of
damage and defects
before commissioning. Any changes to the
RINK Disk Spreader
DS3100
(including changes in operation), which may adversely affect safety, are to be
eliminated immediately. Any changes or additions to the
RINK
Disk Spreader DS3100
are generally prohibited for safety reasons (except for the changes/additions approved by
the manufacturer). If any modifications to the
RINK Disk Spreader DS3100
are made,
the current valid CE label will lose its validity and will have to be renewed by the person,
who has undertaken the modifications on their own.
