background image

www.redbackaudio.com.au

Redback® Proudly Made In Australia

7

Redback® A 4505C

 Lockdown Timer with Network Access

13 

Audio Out RCA Connectors 

 

Connect these outputs to the input of the background music amplifier.

14  

Bell Contact

 

 

These contacts are for remote triggering of the Bell tone. These could be triggered by a remote switch or other  

 

closing contact.

15  

Lockdown Contact

 

 

These contacts are for remote triggering of the Lockdown tone. These could be triggered by a remote switch or  

 

other closing contact.

16 

Fire Contact

 

 

These contacts are for remote triggering of the Fire tone. These could be triggered by a remote switch or 

 

other closing contact.

17  

Cancel Contact

 

 

These contacts are for remote triggering of the cancel function. These could be triggered by a remote switch or 

 

other closing contact.

18 

Mic Volume

 

Adjust this trimpot to adjust the Paging Microphone volume (Microphone currently not available).

19 

RJ45 interface

 

This RJ45 port is for connection of a microphone paging console (currently not available).

20 

RJ45 interface

 

This RJ45 port is for connection to the A 4599 or A 4599V wall plates.

21 

Dip Switches

 

These are used to select various options. Refer to DIP Switch Settings section.

22  

24V DC Input (Backup)

 

 

Connects to a 24V DC backup supply with at least 1 amp current capacity. (Please observe the polarity)

23 

24V DC input 

 

Connects to a 24V DC Plugpack with 2.1mm Jack.

Содержание A 4505C





















Отзывы: