A 2733B CD/MP3 Player Instructions
Congratulations on your purchase of the Redback anti shock CD / USB
/ SD/MMC Card reader player with speed control and remote control.
Features:
• Accepts CD, CD-R, CD-RW discs plus USB flash drive and SD/MMC
memory cards.
• Accepts file types of MP3 and WMA files (on all formats above).
• Operates from 240V ac or 24V dc power.
Installation:
Connect the stereo RCA output to a line level amplifier input.
Install the batteries (supplied) in the remote control. The battery com-
partment is located at the bottom of the remote control as shown in
figure 1.
Remove the battery compartment by pushing the compartment lock in
the direction shown above. Place the battery positive electrode (+ sign)
facing upwards. Push the battery compartment back into the remote
control. Replacement batteries are type CR2025 (3V)
Operation:
• Turn rocker switch on and press power button to turn on.
• Press SD / USB / CD switch to change between CD, USB or
SD/MMC source.
• To playback or pause, press PLAY/PAUSE on the front panel or
on the remote control.
• Press REV, F.WD on the front panel or
on the remote control
for desired next or previous track number. The player will continue to
play while displaying selected tracks. When the desired selected
track is displayed, press play/pause button again to begin playing
the selected track.
• To stop playback press STOP/EJECT on the front panel or press
once on the remote control.
• Press FB, FF on the front panel or
on the remote control to
scan forward or backward to a particular point during play.
Pitch Controls:
This function works with all music file types.
LO - PITCH:
Pressing this button on the front panel or the remote con-
trol reduces the speed (pitch) by 2% increments. Press once, and the
screen will indicate PITCH: -1. Press again for up to 10 steps of speed
variation.
HI – PITCH:
Pressing this button on the front panel or the remote con-
trol increases the speed (pitch) by 2%. Press once, the screen will indi-
cate PITCH: 1. Press again for up to 10 steps of speed variation.
NOR – PITCH:
Pressing this button on the front panel or the remote
control resets the pitch to zero (ie normal speed).
CD Playback:
• Insert a disc into the slot with the data side facing down, and play-
back starts automatically. Track number and playing time will be
displayed on display panel.
• When inserting a disk into the CD player or taking a disc out, it is
necessary to let the CD player insert the disk and return automati-
cally. Do not force the disc in or out of the disc slot as this may
cause serious damage to the unit.
• The LCD DISPLAY displays CD status including track number and
playing time.
• Press STOP/EJECT on the front panel once to stop playback.
• Press STOP/EJECT again and the display will show total track num-
bers and total time.
• Press STOP/EJECT for the 3rd time and the disc will eject.
• Press STOP/EJECT a fourth time and the disc will be inserted again.
• For CD with MP3 or WMA files. Press FOLDER on the front panel or
remote control to select the desired folder (directory).
SD/MMC Card:
• Insert SD Card or MMC Card into the SD/MMC CARD slot on the
front panel. Push the card into the slot until it clicks into the slot.
• When taking the card out, ensure that you hear it click and then
release the card.
• Do not use force to pull the card out as this may cause damage to
the card or the unit.
• Press SD / USB / CD or SD / USB / CD on the remote control to
Remote
Battery
compartment
Remote
Remote
Fig 1. Installing Batteries in Remote Control
A 2733B MP3/CD Player Operating Instructions
®
