13
SYSTEM WIRING
STANDARD BMS INSTALLATION
TYPICAL MANAGER SETUP
*1
The size of this fuse relates to the total current draw of all the loads connected to the House
Battery, and should be rated slightly higher than this. REDARC recommends the use of MIDI Style
Fuses.
*2
Essential loads are loads which must be left on at all times, until the battery is flat. Non-essential
loads are those switched off when the battery reaches a particular low-charge level,which can be
set in the ‘Advanced Settings’ menu.
*3
Both CANBus connections can be used for either the Display or Battery Sensor.
*4
Ensure the RED terminal on the Battery Sensor is connected to the Battery Positive Terminal.
A single fuse and holder setup from the Fuse Kits available
from REDARC.
Part number FK40 (40 A) or FK60 (60A).
