12
8
MONOCRYSTALLINE SOLAR BLANKET INSTALLATION GUIDE
8.1 Connecting the Solar Blanket
• Take care when connecting and disconnecting the Anderson
™
plug to avoid damage
to the cable and junction box.
• Always pull from the connectors and not from the cable.
Pull from
to disconnect
connectors
8.2 Using the Solar Blanket
• While in use, place the wrap around velcro sleeve behind the Blanket.
• REDARC Solar Blankets are UV stabilised, however, the high level of UV exposure will still lead to some
degradation of product appearance after extended use.
• Do not walk on the Solar Blanket.
• Not recommended to use in the rain.
• Not recommended for use when subjected to salt spray conditions.
8.3 Cleaning the Solar Blanket
• Prevent scratches and increase charging performance by keeping the solar
Blanket free from dust, dirt or sand.
• Allow your Blanket to cool before cleaning.
• Do not use any chemical cleaning agents as it may damage the solar cell surface and degrade
performance.
• Carefully remove dust or dirt using a sponge or damp clean chamois and dry with a
soft micro fibre cloth.
8.4 Storing the Solar Blanket
• Allow your Solar Blanket to dry before folding away to prevent the likelihood of corrosion.
• Store your Solar Blanket in a dry, cool place.
• Take care to store your Blanket securely to prevent damage during transit.
