24 | Operation
Safe Vehicle Transportation
The REDARC PowerDock is recommended to restrain the GoBlock for safe transportation in a
vehicle, however
it is the vehicle operators responsibility to ensure that the restraint method
and equipment comply with local laws and standards.
WARNING
An unsecured GoBlock can become dangerous in an accident or sudden stop. The GoBlock
must be securely locked into the Dock during transport — make sure the Handle is fully
closed and latched prior to travel.
The PowerDock must be installed behind (not in front) of the vehicle seats. Do not install the
GoBlock in the vehicle interior area shared by occupants.
Padlock Attachment
As an anti-theft measure, a padlock can be attached to either side of the Handle. Attach a padlock
to the side that is easiest to access.
Consider clearance for accessing a padlock when choosing your PowerDock mounting location.
See
'Mounting Clearances' (page 9)
The Padlock Attachment Points are compatible with a standard 40 mm (1
9
⁄
16
") padlock with a
maximum shank diameter of ≤ 6.5 mm (¼")
The Handle must be in the docked position for the Attachment Point holes in the Handle to align
with the corresponding holes in the PowerDock body.
Insert the open padlock through the
top slot.
Feed the padlock through the aligned holes
in the Handle and out through the bottom
hole in the Body.
Click!