![background image](http://html.mh-extra.com/html/redarc/ebrh-accv3-na/ebrh-accv3-na_manual_1428661007.webp)
6
2 INSTALLATION
2.2
Wiring the brake controller
REDARC Electronics manufactures a number of vehicle-specific wiring
harnesses for quick and easy installation (refer to REDARC’s website for details).
The universal wiring harness included with th EBRH-ACCV3-NA kit is the TPH-
025 ‘Universal Harness’ which is typically used for older vehicles not covered by
our range of wiring harnesses. Please follow the subsequent instructions for all
custom installations.
A Fuse or Circuit Breaker of appropriate rating must be installed to protect the
vehicle system. Please refer to the installation instructions starting on Page 7
for specific instructions on where to install the Fuse or Circuit Breaker and for
appropriate Fuse or Circuit Breaker rating. The Fuse or Circuit Breaker must be
installed as close as possible to the battery.
Ensure that the wire(s) and all connections used to install the Tow-Pro
®
Elite
are suitably rated to supply the required current to simultaneously operate the
trailer electric brakes and stop lamps. Incorrect wiring can result in reduced (or
total loss of) trailer braking and/or damage to property or persons.
The Tow-Pro
®
Elite does not act as a trailer lights voltage converter. If the trailer
brake lights operate on a different voltage, damage to the vehicle; trailer and/
or Tow-Pro
®
Elite and associated wiring may result. This may also result in
reduced (or total loss of) trailer braking.
Содержание EBRH-ACCV3-NA
Страница 26: ...25 9 NOTES ...