RED SCARLET-W Series страница 148 Скачать руководство пользователя

Страница: 148 / 200

RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W

955-0116_V6.1, REV-U | 148

Your camera functionality may be upgraded by installing the latest firmware. Make a habit of frequently visiting

www.red.com/downloads

to check for new versions of camera firmware, updated operation guides, and post

production software.

VERIFY CURRENT CAMERA FIRMWARE

To see the firmware version that is currently installed on your camera, go to

Menu

Settings

Maintenance

System Status

Camera Info

. A higher number reflects a later release.

UPGRADE CAMERA FIRMWARE

Install the most recent firmware. Unless otherwise specified in the online release notes, you do not need to

upgrade to any firmware in between your current version and the most recent version available online.

NOTE

: You must black shade the camera after upgrading it. For more information, go to

“Sensor Calibration” on

page 110

NOTE:

Upgrading your camera deletes all in-camera user-generated Preset, Look, and Custom Overlay files.

1. If you have user-generated preset files on your camera, follow the instructions below to save the files to an

SSD:

A. Turn on the camera, insert an SSD (RED MINI-MAG

) into the camera, and format the SSD.

B. Go to

Menu

Presets

and copy user-generated Camera Preset and Look files to the SSD.

C. Go to

Menu

Settings

Display

Monitor Control

and copy user-generated Overlay files to the SSD.

D. Turn off the camera, and remove the SSD. You will copy the files back to your camera after the upgrade

procedure, as described in

Step 14

2. Connect an SSD (RED MINI-MAG) to your computer.

NOTE:

On Mac

computers with REDCINE-X PRO

installed, RED Watchdog mounts the SSD as Read-Only

by default, which means that you are unable to write files (including firmware upgrade files) to the SSD.

Change the

Mount

preference to

Read-Write

before attempting to copy firmware to the SSD.

3. Download WEAPON firmware from

www.red.com/downloads

4. Unzip the firmware zip file.
5. Copy the

force_upgrade

folder and its contents to the top level of the SSD directory.

6.  Eject or unmount the SSD, and then remove the SSD.
7.  Ensure the camera is turned off.
8.  Insert the SSD with the force_upgrade folder into your camera.
9.  Turn on the camera.

The upgrade runs automatically.
During upgrade, the fans run at high speed and the PWR and REC LEDs flash green. After approximately

15 seconds, the LEDs stop flashing and the camera turns off. Nothing displays on the external monitors

during the upgrade.

10. After the camera turns off, remove the SSD and wait 10 seconds.

UPGRADE CAMERA

FIRMWARE

Содержание SCARLET-W Series




































































































































































































Результаты поиска

Содержание SCARLET-W Series

Отзывы:

Похожие инструкции для SCARLET-W Series

Бренды по названию

Популярные бренды

RED SCARLET-W Series, Руководство по эксплуатации

Результаты поиска

Содержание SCARLET-W Series

Отзывы:

Похожие инструкции для SCARLET-W Series

Бренды по названию

Популярные бренды