COPYRIGHT © 2015 RED.COM, INC
REDLINK BRIDGE OPERATION GUIDE
955-0064, REV-D | 13
04
The REDLINK™ Bridge provides a communication pathway for your app to interface with the DSMC
®
. In
order for this pathway to operate properly, you must enable WiFi in the DSMC and wirelessly connect the
REDLINK Bridge to your device. There are two ways to connect the REDLINK Bridge to a device:
Ad-Hoc mode
: The REDLINK Bridge and your device connect to each other.
Infrastructure mode
: The REDLINK Bridge and your device both connect to an access point, and communi-
cate through that wireless network.
CONNECT VIA AD-HOC MODE
In Ad-Hoc mode, the REDLINK Bridge and your device connect to each other. To connect the REDLINK Bridge
to your device via an ad-hoc network, follow the instructions below:
1. Dock the REDLINK Bridge to the DSMC.
2. Go to
Menu
>
Settings
>
Setup
>
Communication
.
3. Select the
WiFi
tab.
4. Select the
Enable WiFi
check box.
5. Select
Ad-Hoc
.
6. Select a wireless channel from the
WiFi Channel
drop-down menu. The default is Ch1, and you can select
one out of 11 channels.
7. Select a security option from the
Camera Encryption
drop-down menu:
‒
NONE
: The connection will be unsecured.
‒
WEP
: The connection will be encrypted via WEP.
CONNECT REDLINK BRIDGE
TO AN APP
