LCD/EVF ADAPTORS
The LCD/EVF adaptors enable you to use legacy RED displays (which feature LCD/EVF connectors) with the RED
RANGER (which features pogo LCD/EVF connectors). For more information on available displays, go to
.
ITEM
PART NUMBER
DSMC2 LCD/EVF Adaptor A
720-0037
DSMC2 LCD/EVF Adaptor B
720-0038
DSMC2 LCD/EVF Adaptor D
105-2119
LCD/EVF ADAPTOR A
Figure: DSMC2 LCD/EVF Adaptor A
The DSMC2 LCD/EVF Adaptor A makes your existing RED Touch, RED PRO, and RED PRO Touch displays, as well
as RED EVFs, fully compatible with the RED RANGER. The DSMC2 LCD/EVF Adaptor A converts the pogo
connection on the RED RANGER to a 16-Pin 1B LCD/EVF port. The DSMC2 LCD/EVF Adaptor A is designed to attach
to the primary (top) EVF/LCD port on the RED RANGER.
When used along with the DSMC2 LCD/EVF Adaptor B, this adaptor enables you to mount a DSMC2 RED Touch LCD
away from the camera—to a NOGA arm or other stable mounting point.
The DSMC2 LCD/EVF Adaptor A is compatible with the BOMB EVF, (LCOS) and (OLED) models, or later.
LCD/EVF ADAPTOR B
Figure: DSMC2 LCD/EVF Adaptor B
The DSMC2 LCD/EVF Adaptor B converts the display signal from a pogo connection to a 16-Pin 1B LCD/EVF port.
When used along with the DSMC2 LCD/EVF Adaptor A or DSMC2 LCD/EVF Adaptor D, this adaptor enables you to
mount a DSMC2 RED Touch LCD away from the camera—to a NOGA arm or other stable mounting point.
C OPYR I GH T © 2 0 2 0 R ED . C OM , L L C
9 5 5 - 0 1 9 2 _ V7 . 3 , R EV- A
|
2 2
RED RANGER GEMINI OPERATION GUIDE
