COPYRIGHT © 2015 RED.COM, INC
RED MOTION MOUNT OPERATION GUIDE
955-0013, REV-K | 10
5. Remove the lens mount from the camera.
NOTE:
When the MOTION MOUNT is not in use the rear glass is blue. During operation the rear glass turns
yellow. If you remove the MOTION MOUNT shortly after operation, the glass turns yellow and develops blue
spots. As the glass cools, it returns to its original blue color. This color transition is typical behavior.
INSTALL THE MOTION MOUNT
REQUIRED TOOL:
T20 TORX
®
driver
Turn off the camera and remove any accessories or cables that may interfere with installation before proceeding.
1. Inspect the gold electrical contact pins on the front of the camera and the gold contact pads on the rear of
the MOTION MOUNT. Ensure that they are free of any contamination.
2. Align the MOTION MOUNT on the front of the camera. The camera connection pins must align with the
MOTION MOUNT pins.
Remove the lens mount
Align MOTION MOUNT pins
