RED EPIC MYSTERIUM-X, Руководство по эксплуатации

Страница: 50 / 192

Version 1.6.24 BETA
©2011 RED.COM INC. JULY 25, 2011
48 48
REDCODE RAW data recordings store the Color Temperature and Exposure (ISO) and any RGB color
processing values you use in the monitor path as metadata. This metadata is used in REDCINE-X or
other post production software as initial white balance, exposure and color correction points however,
you are free to change these values at any time when you process the RAW footage.
Time Code and Edge Code values used by the camera are Non Drop Frame (NDF); Drop Frame (DF) is
not supported. Audio is captured uncompressed at 24-bit resolution, 48KHz sample rate per channel.
Digital media such as REDMAG 1.8” SSDs are very robust, but should be treated with equal care as
exposed film or a videotape master. We recommend storing digital media that contains your footage in a
secure location and backing up the data to a digital archival media, such as data tape or hard disk drive.
RECORD INDICATOR
When recording, the RED EPIC camera provides a variety of record indications (tallies):
-
Timecode, normally displayed in white colored text, will be displayed in red colored text.
-
A small Red dot will appear in the top right corner of the VIEWFINDER output(s).
-
The REC LED on the right side of the camera Brain will illuminate Red.
-
REDmote upper LED will illuminate Red, and the Timecode will turn Red.
-
If using a BOMB-EVF, the LED on the front will illuminate Red if Tally is enabled
-
SMPTE-RP188 timecode VITC-2 HANC metadata record flag will be enabled on HD-SDI outputs.