RED EPIC MYSTERIUM-X, Руководство по эксплуатации

Страница: 35 / 192

Version 1.6.24 BETA
JULY 25, 2011
©2011 RED.COM INC.
33
IMPORTANT: If after upgrading your EPIC to v1.6.20 or higher series firmware, you receive a "New
fan available, please contact RED" notification on the camera, please contact RED technical
support for assistance.
Press OK to use your camera as normal - the message will appear each time the camera is
powered up. Pressing OK, HIDE will hide the message when the camera is powered up, however,
be mindful that until the fan is changed, the camera temperature should be monitored. If the fan is
not replaced as RED recommends and the camera is damaged by overheating, the camera
warranty will be voided.
Once the updated fan has been installed and the camera is powered up, the message will continue
to appear. Press OK, then go to SECONDARY MENUS > SETTINGS > MAINTENANCE >
REDISCOVER and perform the rediscover procedure to clear the message.
POWER DOWN
The camera can be powered down in two ways:
1.
Using REDmote or Side Handle Menu controls, or via Touch Screen LCD icons. Refer to SECONDARY
MENUS > POWER.
2. Depress and continue to hold the Power / Record button in its fully depressed position for a minimum
of 5 seconds. When the button is released, INITIATING CAMERA SHUTDOWN will display and camera
will power down.
After Power Down, the Power Status LED will illuminate Red, if an appropriate power source is available.