RED EPIC MYSTERIUM-X, Руководство по эксплуатации

Страница: 158 / 192

Version 1.6.24 BETA
©2011 RED.COM INC. JULY 25, 2011
156 156
Use the NAVIGATION GROUP directional pad to move the cursor to a different parameter if desired,
then press the ENTER key to select that parameter and use the Scroll Wheel to adjust that parameter’s
value. To confirm the change in parameter value and to exit the adjustment menu, press the ENTER
button.
To access the camera’s menus, press the MENU button at the lower left. The MENU displays on the
EVF, LCD or external monitors if the LCD and/or EVF are not connected disconnected.
Use the NAV GROUP to make changes to the cameras settings. Use the scroll wheel and directional
pad to move the cursor to navigate and make changes to the desired settings. When a desired setting
change is made, press the ENTER button or the directional pad UP arrow to exit from that setting.
Exiting Menus to Main Screen
To EXIT from the Secondary Menus and return to the main screen:
•
Press the MENU button until the main screen is displayed.
USING REDMOTE LCD STAND-ALONE
The LOCAL function of the REDmote allows you to control the camera settings directly on the REDmote
LCD as opposed to having to see the settings on the camera LCD or external monitors. For complete
details refer to REDMOTE MENUS > SOFT MENU BUTTONS 1-3 > 2 REMOTE > LOCAL.
RECORDING
IMPORTANT: Before recording from a REDmote ensure the camera is properly powered, set up
and media is connected. Refer to BASIC OPERATION.
To record, press the Red REC (record) button on the REDmote (or any of the other available record
buttons).
•
If media is connected and properly formatted, the upper LED will illuminate Red and the Timecode
text will change to Red.
•
If media is NOT connected, the camera LCD will indicate “NO MEDIA ATTACHED”.
To stop recording, press the record button a second time.
MAINTENANCE
UPGRADING REDMOTE FIRMWARE
The REDmote Update program allows you to upgrade the firmware on your REDmote.
NOTE: Once firmware is upgraded (on REDmote or camera) the REDmote must be paired to the
camera again.