INSTALL TOP FAN WITH TOP VENT SCOOP
REQUIRED TOOLS
T8 TORX
®
driver
T6 TORX driver (included)
REMOVE TOP VENT SCOOP
1. Turn off the camera.
2. Remove all power supplies, accessories, and the lens.
3. Place the BRAIN
®
on a suitable flat work surface with the top of the BRAIN facing upward.
4. Use a T8 TORX driver to remove the four (4) M2.5x0.45 x 6 mm cap screws that attach the top vent scoop to the
BRAIN.
Figure: Remove Cap Screws
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 2 , R EV - N
|
1 6
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
