INSERT A BATTERY
1. Align and insert the REDVOLT battery.
2. Apply pressure to the battery until a click is heard, signalling the battery is properly seated.
REMOVE A BATTERY
1. Press the
Eject
button to release the REDVOLT from the module.
2. Remove the battery.
PRO BATTERY MODULE (QUAD)
Figure: Pro Battery Module (Quad) with REDVOLTs (Left) and REDVOLT XL (Right)
The Pro Battery Module (Quad) harnesses the power of four (4) REDVOLT batteries or two (2) REDVOLT XL batteries.
Similar to the Pro Battery Module (Dual), this module enables hot swap support for continuous power to the camera
without missing a shot. The module also offers 1/4-20 mounting points for configuration support.
For installation and removal instructions, go to
"EPIC/SCARLET Power Module Operations" on page 31
.
WARNING:
DO NOT use more than one (1) battery module at a time. Using multiple battery modules may damage the
camera and is not covered under warranty.
NOTE:
A Module Adaptor or +1 Adaptor Module is required to mount this module to the EPIC/SCARLET BRAIN.
NOTE:
The Pro Battery Module (Quad) does not charge batteries.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
3 4
RED DSMC POWER OPERATION GUIDE
