FRAME TRIGGER
NOTE:
This mode is not available in Stills mode.
NOTE:
Audio is not recorded in Frame Trigger mode.
In Frame Trigger mode, the camera records the specified number of frames for each external trigger. This mode limits
the REDCODE based on sustainable record rates.
To use Frame Trigger mode, follow the instructions below:
1. Go to
Menu
>
Settings
>
Recording
>
Mode
.
2. Select
Frame Trigger
from the
Mode
drop-down menu.
3. Use the
Limit Recording to
fields to set the recording to end at a predefined frame limit (optional).
4. Select a
Pre Count
and
Post Count
. For more information, go to
"Pre Count and Post Count" on the next page
.
5. Close the menu.
6. Start recording.
The overlay displays the number of frames recorded out of the total amount of frames.
NOTE:
There may be a delay between receiving the external trigger and capturing the next frame(s). The delay may be
as long one (1) frame period at the current recording frame rate. To completely synchronize frames to an external
trigger, set
Sensor Sync Mode
to
MoCo
. For more information, go to
SPEED RAMP MODE
NOTE:
This mode is not available in Stills mode.
NOTE:
Audio is not recorded in Speed Ramp mode.
Speed Ramp mode lets you program the current recording frame rate to transition to different recording frame rates
during recording.
1. Go to
Menu
>
Settings
>
Recording
>
Mode
.
2. Select
Speed Ramp Mode
from the
Mode
drop-down menu.
3. Use the
Limit Recording to
fields to set the recording to end at a predefined frame limit (optional).
4. Select a ramp target:
Ramp A/B/C/D
: Each ramp target is tied to a specific Target/Duration combination.
Ramp Reset
: Ramp to the starting frame rate with the specified Duration.
5. Set the
Target
frame rate.
6. Set the
Duration
, which is how long it takes to transition from the current frame rate to the target frame rate.
7. Go to
Menu
>
Settings
>
Setup
>
Keys
and program a key to one of the following functions:
Record: Start Speed Ramp A/B/C/D
Record: Start Speed Ramp Reset
8. Start recording.
9. To start speed ramp, press the key that you have mapped to start the speed ramp.
The frame rate transitions to the target frame rate during the duration you set up.
NOTE:
If using speed ramp mode, select an exposure that is valid for each ramp target frame rate. If the camera
ramps to a frame rate that is incompatible with the current exposure, the exposure changes to the longest
exposure possible for the frame rate.
C O PYR I G HT © 2 0 1 7 R ED.C O M , I NC
9 5 5 - 0 1 2 7 _V 6 .3 , R EV - M
|
9 6
RED RAVEN OPERATION GUIDE
Содержание RED DRAGON 4.5K
