For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com
O
ADDS PROFIBUS DP CONNECTIVITY TO THE DATA STATION
PLUS AND MODULAR CONTROLLER SERIES
O
PROFIBUS DP SLAVE PROTOCOL
O
EASY INSTALLATION
GENERAL DESCRIPTION
Both the Modular Controller Master (enhanced models) and Data Station
Plus contain a proprietary expansion port which provides a high speed, parallel
architecture that extends the functionality and flexibility of the platform. This
approach allows these products to evolve concurrently with the latest advances
in communications and standards, without sacrificing performance. This high
bandwidth channel has significantly greater throughput when compared to the
traditional (external) serial gateway approach.
The XCPB option card adds PROFIBUS DP connectivity to the series. This
allows a high-speed exchange of blocks of data, at data rates up to 12MBaud,
between the hosting Modular Controller or Data Station and a Master PLC or
PC on a PROFIBUS network. The DP suffix refers to “Decentralized
Periphery”, which is used to describe distributed I/O devices connected via a
fast serial data link with a central controller.
The XCPB communication card is easily installed by removing the blank
expansion port cover of your Modular Controller or Data Station Plus, and
plugging the XCPB card into the expansion port. Configuration is simple using
Red Lion’s free Crimson 2.0 software.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
literature or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Do not use the controller to directly command motors, valves, or other
actuators not equipped with safeguards. To do so can be potentially harmful to
persons or equipment in the event of a fault to the controller.
ORDERING INFORMATION
1
Use these part numbers to purchase Crimson 2.0 on CD with a printed manual,
USB cable and RS-232 cable. Otherwise, download free of charge from
www.redlion.net.
CONTENTS OF PACKAGE
- XCPB option card
- This hardware bulletin
GSD FILE
The GSD file and associated bitmap are part of the Crimson 2.0 installation.
After installing Crimson 2.0, both files can be found on your PC’s hard drive at
C:\Program Files\Red Lion Controls\Crimson 2.0\Firmware, or on our website
at http://www.redlion.net
SPECIFICATIONS
1.
POWER REQUIREMENTS:
Power is supplied to the option card from the
main board of the Modular Controller Master or Data Station Plus.
2.
COMMUNICATIONS:
PROFIBUS Port:
FIELDBUS Type : PROFIBUS-DP EN 50 170, I. The
PROFIBUS port has autobaud detect up to 12M baud and is digitally isolated.
3.
CERTIFICATIONS AND COMPLIANCES:
Refer to main unit manual or “Agency Approvals” section of Red Lion’s
website for agency certifications.
ELECTROMAGNETIC COMPATIBILITY
Emissions and Immunity to EN 61326: Electrical Equipment for Measurement,
Control and Laboratory use.
Reference Modular Controller Master or Data Station Plus unit for EMC
specifications
4.
ENVIRONMENTAL CONDITIONS:
Operating Temperature Range: 0 to 50°C
Storage Temperature Range: -20 to 80°C
Operating and Storage Humidity: 80% maximum relative humidity (non-
condensing) from 0 to 50°C.
Altitude: Up to 2000 meters.
5.
CONSTRUCTION:
Installation Category I, Pollution Degree 2.
6.
INSTALLATION REQUIREMENTS:
See “Installing the XCPB Option
card” for more details.
MODEL
XCPB - PROFIBUS OPTION CARD FOR DATA STATION PLUS AND
MODULAR CONTROLLER
Bulletin No. XCPB-X
Drawing No. LP0657
Effective 8/06
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
MODEL NO.
DESCRIPTION
PART NUMBER
XCPB
XCPBDP00
SFCRM2
Crimson 2.0 with G3/Data Station Manual
1
SFCRM200
SFCRM2
Crimson 2.0 with Modular Controller Manual
1
SFCRM2MC
PROFIBUS option card for Modular Controller
or Data Station Plus
CAUTION: Risk of Danger.
Read complete instructions prior to
installation and operation of the unit.
1