Red Hat NETWORK 3.7 -, Справочное руководство

Страница: 89 / 208

Chapter 6. Red Hat Network Website 77
Figure 6-4. System Group List
The
System Groups
list contains several columns for each group:
•
Select
— These checkboxes enable you to add systems in groups to the
System Set Manager
. To
select groups, mark the appropriate checkboxes and click the Update button below the column.
All systems in the selected groups are added to the
System Set Manager
. You can then use the
System Set Manager to perform actions on them simultaneously. To add only the systems in all
selected groups, select them and click the
Work with Intersection
button. To add all systems in
all selected groups, select them and click the Work with Union button. Each system will show up
once, regardless of the number of groups to which it belongs. Refer to Section 6.4.4 System Set
Manager — for details.
•
Status
— Shows which type of Errata Alerts are applicable to the group or confirms that it is up-
to-date. Clicking on a group’s status icon takes you to the
Errata
tab of its
System Group Details
page. Refer to Section 6.4.3.3 System Group Details — for more information.
The status icons call for differing degrees of attention:
•
— All systems within group are up-to-date
•
— Critical Errata available, update strongly recommended
•
— Updates available and recommended
•
Group Name
— The name of the group as configured during its creation. The name should be
explicit enough to easily differentiate between it and other groups. Clicking on the name of a group
takes you to
Details
tab of its
System Group Details
page. Refer to Section 6.4.3.3 System Group
Details — for more information.