Red Hat GLOBAL FILE SYSTEM 4.7, Руководство пользователя

Страница: 42 / 60

system resides. When the fill operation is completed, the journal index is updated.
The
gfs_jadd
command must be run on mounted file system, but it only needs to be run on one
node in the cluster. All the other nodes sense that the expansion has occurred.
To verify that the changes were successful, use the
gfs_jadd
command with the
-T
(test) and
-v
(verbose) flags. Running the command with those flags displays the current state of the
mounted GFS file system.
Usage
gfs_jadd -j Number MountPoint
Number
Specifies the number of new journals to be added.
MountPoint
Specifies the directory where the GFS file system is mounted.
Comments
Before running the
gfs_jadd
command:
• Back up important data on the file system.
• Run a
gfs_tool df MountPoint
command to display the volume used by the file system
where journals will be added.
• Expand the underlying cluster volume with LVM. For information on administering LVM
volumes, see the LVM Administrator's Guide
After running the
gfs_jadd
command, run a
gfs_jadd
command with the
-T
and
-v
flags
enabled to check that the new journals have been added to the file system.
Examples
In this example, one journal is added to the file system on the
/gfs1
directory.
gfs_jadd -j1 /gfs1
In this example, two journals are added to the file system on the
/gfs1
directory.
gfs_jadd -j2 /gfs1
Chapter 4. Managing GFS
30