Red Hat ENTERPRISE LINUX 5.5 - S 2010, Руководство пользователя

Страница: 17 / 470

RHBA-2010:0194: bug fix and enhancement update
7
• previously, when installing on IBM System z systems,
anaconda
assumed that the network gateway
was unreachable if its attempt to ping the gateway timed out after 10 seconds.
Anaconda
would
then prompt the user to select a gateway. However, if
IPADDR
in the
conf
file has changed recently,
network interfaces take longer to respond.
Anaconda
now prompts the user only when three pings
have failed and therefore avoids prompting the user for gateway information that is already correctly
specified in the
conf
file. (
BZ#506742
34
)
In addition, this updated package provides the following enhancements:
• after transferring installation files to a z/VM guest, a user must execute a series of
Conversational
Monitor System
(CMS) commands to IPL the zLinux installation. These commands can be
scripted, but no such script was previously included with Red Hat Enterprise Linux 5. The lack of
a readymade script made installation more difficult for users unfamiliar with CMS commands. The
CMS script for starting the install process on z/VM is now included in the Red Hat Enterprise Linux 5
images, simplifying installation. (
BZ#475343
35
)
•
anaconda
now loads the Brocade BNA Ethernet Controller driver, and supports Brocade Fibre
Channel to PCIe Host Bus Adapters. (
BZ#475707
36
)
• previously,
anaconda
did not offer users the opportunity to configure NFS options during interactive
installation (although these could be configured in kickstart files). Users who needed to fine-tune
NFS parameters for installation were therefore forced to run an unattended installation. Now,
anaconda
presents users who select NFS installation with a dialog in which they can configure NFS
options to suit their needs. (
BZ#493052
37
)
• previously, it was not possible to configure hypervisor parameters during a kickstart installation. As
a result, users needed to specify hypervisor parameters manually after installation, negating the
usefulness of kickstart as as a mechanism for unattended installations. Now,
anaconda
recognizes
a new kickstart option,
--hvargs
and sets Hypervisor parameters accordingly. (
BZ#501438
38
)
• previouisly, during a kickstart installation when multiple multipath LUNs were available,
anaconda
would automatically choose the LUN with the lowest ID number for the root device. Users had no
ready way to customize this behavior. Now,
anaconda
supports a
multipath
kickstart command
with
--name
and
--device
options that allow users to specify a LUN for root. (
BZ#502768
39
)
•
anaconda
can retrieve kickstart files from FTP servers. Previously, however,
anaconda
did not
support users specifying authentication credentials to access an FTP server. Therefore, if access
to the server were protected by a passphrase,
anaconda
could not retrieve the kickstart file.
Now, when specifying the location of a kickstart file with the
ks=
boot option, users can provide a
passphrase to allow
anaconda
to retrieve the kickstart files fom a protected server. (
BZ#505424
40
)
• previously, troubleshooting errors that occurred while running %pre and %post kickstart scriptlets
was very difficult because
anaconda
did not log the behavior of these scriptlets.
Anaconda
now
copies %pre and %post kickstart scriptlets to
/tmp
together with a log. These records make
troubleshooting kickstart installations easier. (
BZ#510636
41
)
•
Reipl
is a kernel feature that instructs IBM System z systems where to boot next, as these systems
do not have a default boot location.
Anaconda
did not previously support
Reipl
, which meant
that during installation, users had to specify a boot location manually between different phases
of the installation.
Anaconda
now supports
Reipl
, so these reboots can happen automatically.
(
BZ#512195
42
)