Chapter 1. Package Updates
108
• Call trace error when resuming from suspend to disk.
BZ#539521
789
• Add BL2xx and DL7xx to the list of ProLiant systems in
xen/arch/x86/ioport_emulate.c
in
the Xen variants of Red Hat Enterprise Linux 5.
BZ#536677
790
• Mask out extended topology CPUID feature.
BZ#533292
791
On Intel Nehalem (55xx) dom0 hosts, booting Windows 2008 R2 64-bit domU resulted in a hang.
This was caused by incomplete emulation of the CPUID instruction in hvm/xvm support.
Because Xen guests do not need to know about extended topology, this update masks out that
topology to prevent this problem from occurring.
• Fix timedrift on VM with pv_clock enabled.
BZ#531268
792
• Use upstream
kvm_get_tsc_khz()
BZ#531025
793
• Whitespace updates in Xen scheduler.
BZ#529271
794
• Xen panic in msi_msg_read_remap_rte with acpi=off.
BZ#525467
795
• Backport interrupt rate limiting.
BZ#524747
796
• RHEV: SAP SLCS 2.3 fails during install/import in a RHEV-H/KVM guest with PV KVM clock.
BZ#524076
797
• Mask out
xsave
and
osxsave
to prevent boot hang when installing HVM DomU.
BZ#524052
798
Attempting to boot a fully virtualized DomU with rawhide's 2.6.31-14.fc12.x86_64 for installation
hangs almost immediately. A 32-bit HVM booted and installed successfully on a 32-bit host.
This update masks out the
xsave
and
osxsave
bits to prevent this problem from occurring.
• Enable display of the
ida
flag on Xen kernels.
BZ#522846
799
The
ida
flag, which indicates the presence of the Turbo Boost feature, was not seen in the cpuflags
section of
/proc/cpuinfo
on Xen kernels. This occurred on both 32-bit and 64-bit Xen kernels.
This update ensures that this flag is displayed when the Turbo Boost feature is present on Xen
kernels.
• Xen fails to boot on Itanium with > 128GB memory.
BZ#521865
800
A problem was found where attempting to boot a Xen kernel on Itanium systems with more than
128GB of RAM would result in a Xen panic. This problem was traced to a miscalculation of the Xen
heap size.
This update includes support for the
xenheap_megabytes
hypervisor option to address this
problem. For example, if the installed memory exceeds 64GB, it is suggested to set the option to a
value equal to the memory size in gigabytes. For example, on a system with 128GB of memory, the
elilo.conf
file should include the directive:
append="xenheap_megabytes=128 --"
• Fix SRAT check for discontiguous memory.
BZ#519225
801
A problem was found where Xen could ignore valid SRAT tables because it expects completely
contiguous memory ranges, where the sum of the node memory is approximately equal to the
Содержание ENTERPRISE LINUX 5.5 - S 2010
