Red Epic Dragon Скачать руководство пользователя страница 149

Страница: 149 / 167

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-D

149

DO NOT USE any other solvents, chemicals or third party cleaning kits because they have not been tested on

RED TOUCH LCD displays and can possibly damage them. Not approved for use on RED TOUCH LCD displays:

Rubbing Alcohol

Isopropyl Alcohol (<90%)

Windex

Pre-packaged lens cleaner containing any additives, such as detergent, anti-static, fragrance, etc.

For proper cleaning and storage, remember to protect the RED TOUCH LCD by storing it in the RED Microfiber

bag.

EVF

Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)

or equivalent to clean the viewfinder lens. Ensure your spray the solution onto the pad and not directly onto

the lens surface.

REDMOTE SCREEN

Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)

or equivalent to clean the screen on Touchscreen and Non-Touchscreen LCDs.

LENSES

Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)

or equivalent to clean the viewfinder lens. Ensure your spray the solution onto the pad and not directly onto

the lens surface.

DSMC SIDE HANDLE LCD

Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)

or equivalent to clean the screen on the DSMC SIDE HANDLE LCD.

BACK FOCUS ADJUSTMENT

WARNING:

There is a Screw-In metal plug installed in the camera body covering the back focus screw. This plug

must be removed before performing a back focus adjustment. To remove the plug, use a T10 Torx driver.

NOTE:

To perform this procedure as written, you must have a PL mount and RED Focus

™

. For more information

on using the RED Focus, see the

RED Focus Operation Guide

, available at

www.red.com/downloads

Back focus is adjusted by turning the back focus adjustment on the top of the camera’s front plate using a T10

Torx driver. This screw is indicated by a Siemens Star with an arrow pointing to its location.

Back Focus Adjustment Location

Содержание Dragon


































































































































































Результаты поиска

Содержание Dragon

Отзывы:

Похожие инструкции для Dragon

Бренды по названию

Популярные бренды

Red Epic Dragon, Руководство по эксплуатации

Результаты поиска

Содержание Dragon

Отзывы:

Похожие инструкции для Dragon

Бренды по названию

Популярные бренды