C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 7 , R EV - K
|
3 4
REDRAY PLAYER OPERATION GUIDE
APPENDIX B:
REDCOMMAND APP
This section provides setup information for the REDcommand app on your iPhone
®
or iPad
®
for use with REDRAY
®
.
You can use REDcommand instead of the IR Remote to control your REDRAY.
NOTE:
The REDcommand app is optimized for use on the iPhone.
INSTALL REDCOMMAND APP
1. Ensure that your iOS
®
device is connected to the same network that your REDRAY is connected.
2. Open the
App Store
on your iPhone or iPad.
3. Download and install the
REDcommand app
.
4. Open the
REDcommand app
.
REDcommand opens and automatically searches for available REDRAY units.
5. Select your REDRAY.
NOTE:
Currently, you can only control one (1) REDRAY at a time from REDcommand.
REDCOMMAND CONTROLS
After you have paired the REDcommand app to your REDRAY Player, you have full control of the REDRAY using the
REDcommand app. You can easily navigate the MOVIE and SETTINGS menus, as well as select videos.
Figure: Browse Menu and Movies
