![Red Digital Cinema DSMC RED MOTION MOUNT S35 TI PL Скачать руководство пользователя страница 16](http://html.mh-extra.com/html/red-digital-cinema/dsmc-red-motion-mount-s35-ti-pl/dsmc-red-motion-mount-s35-ti-pl_operation-manual_1427290016.webp)
NEUTRAL DENSITY (ND)
The MOTION MOUNT provides a variable ND filter that incorporates an IR filter and polarizer. You can adjust the ND
setting using the on-screen display, or by mapping the following functions to camera keys:
MOTION MOUNT: Increment ND
MOTION MOUNT: Decrement ND
Variable ND functionality is always enabled when the MOTION MOUNT is installed.
For more information on key mapping, go to
"Map Keys for MOTION MOUNT Settings" on page 25
.
SELECT NEUTRAL DENSITY (ND) SETTINGS
1. Go to
Menu
>
Settings
>
Setup
>
Lens
>
Motion Mount
.
2. Select an ND value using the
ND Value
slider. Alternatively, select the settings box and enter a value that you
want.
Fraction
: Displays the neutral density value as a fraction of light transmission.
Density
: Displays the neutral density value as an optical density value.
Stop
: Displays the neutral density value as a stop loss.
3. Select an
ND Increment Size
.
4. If you select
Custom
, enter the new increment size in the field next to the
ND Increment Size
drop-down menu.
You can select any increment in the range 0.01 to 4.00 stops.
NOTE:
When an ND value over 4.00 stops is selected while in “ND Only,” the ND value on the main screen overlay
turns yellow. The following message also displays in the MOTION MOUNT menu screen: “High ND with wide
apertures may cause bokeh asymmetry”.
For more information on bokeh asymmetry, go to
"Out-of-Focus Field Modification" on page 19
.
Figure: Neutral Density (ND) Settings
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 3 , R EV - AB
|
1 6
RED MOTION MOUNT OPERATION GUIDE