RED CAT TEAL Golden Eagle, Руководство оператора

Страница: 40 / 76

39
• The log files will have a .ulg file
extension.
Move or copy the log files from the directory
above to the desired location on the PC.
ENTER KIOSK MODE on the TAC
After transferring the files onto the PC, you will
need to put the TAC back into kiosk mode. This
is for both security and functional reasons while
in the field.
Disconnect the USB cable from the TAC.
Access the vertical side-bar menu.
Touch the TEAL TAC SETTINGS
icon.
Switch the ACTIVE NETWORK to WIFI.
Access the vertical side-bar menu once more.
Select the gray gear SETTINGS icon.
Scroll to the bottom of the menu.
Select ABOUT TABLET.
Select SOFTWARE INFORMATION.
Select KNOX CONFIGURE.
Select APPLY LATEST PROFILE.
• You may see the screen rotate 90
degrees and go through a status update.
• This will take only a few seconds, and
once completed, the TAC will be back in
kiosk mode.
SWITCH ACTIVE NETWORK BACK TO DRONE
To resume flying missions, access the vertical
side-bar menu.
Touch the TEAL TAC SETTINGS
icon.
Switch the ACTIVE NETWORK to DRONE.
→
If the SD card was inserted into the drone
before flight, the photos and videos will be
saved to the SD card. The files can be
transferred directly to a PC.
Remove the SD card from the drone.
Insert the SD card into the SanDisk SD adapter
that was provided in the spares kit, if needed.
•
Any SD adapter will suffice.
Insert the SD adapter or SD card into the PC.
On your computer, open a file browser such as
EXPLORER.
Find and follow the file path to the logs.
•
The video will have a .ts file extension
•
The photos will have a .jpg file extension
and will be labeled IMG.
•
Each photo and video file will be labeled
with either EO or IR.
Move or copy the log files from the directory
above to the desired location on the PC.