4
Scroll down the lock
menu and select
TouchOut2 To option
and change to the
input source for
Device#2. If your
configuration is the
same as the sample
configuration shown
earlier in this manual
then you would set
TouchOut2 to
HDMI2.
Press the back arrow
on the remote or the
front keypad of the
panel to exit the on
screen display.
Router Con튢�guration
See page 46 for login information for the router. For complete instructions on how to
configure the router for wired or wireless networks see the Technical Resource Guide
available here:
http://recordexusa.com/simplicitytouchsupport/Gen3/ST-700-Gen3-Technical-Resource-Gui
de.pdf
RS232 Control
The panel can be controlled by RS232 if connected serial controller using RS232 serial cable
connection. The supported commands can be downloaded
http://recordexusa.com/simplicitytouchsupport/Recordex_SimplicityTouch_RS232_Comman
ds_v20150812.pdf
Version: 17.1.6.0
Page 49