background image

Operation

5

BAL_K21_EN_3V3_BLA_121-006423019

27 / 44

Control unit

BDE-D-KTA for revolving

door operation

Operation

Key

Display

Function

press 2sec.

long or 2x

time quickly

SLIDING DOOR OPERATION

When the rotation unit is positioned in the cross position,
various modes of the sliding door are operational.

– Press the key for approx. 2 sec. or press 2 times

quickly.

– The rotation unit rotates to the cross position and

stops.

– The sliding door is automatically activated.

MANUAL OPERATION

 

Manual rotation or motorized positioning of the rotation
unit into the desired position (i.e. for cleaning purposes)

– Press the key for approx. 2 sec. or press 2 times

quickly.

– The rotation unit will stop and can be rotated manu-

ally.

5.2

Sliding door mode selection

NOTICE

The sliding door operation will only function if "Sliding door" operating mode is selected on
the BDE-D-KTA of the revolving door control unit and the rotation unit is in the cross position.

Control unit

BDE-D-STA for sliding

door operation

Operation

Key

Display

Function

LOCKED

Sliding door is closed.

AUTOMATIC

 

Free passage through the sliding doors in both direc-
tions.

Max. opening width (full opening - summer)

PERMANENTLY OPEN

 

Sliding door remains open, until a different operating
mode is selected.

REDUCED OPENING WIDTH

 

Free passage through the sliding doors in both direc-
tions.

Reduced opening width (winter)

ONE WAY

 

Passage is only possible in one direction (e.g. closing
time).

Содержание K21













































Отзывы: