3
Description
20 / 44
BAL_K21_EN_3V3_BLA_121-006423019
3.4.7
Information on safety strips
CAUTION
Risk of destruction Safety edge
a) Personal injury and damage to property due to malfunctions on the safety edge
ð
Do not use pointed or sharp-edged objects when working on the safety edge.
ð
Do not use aggressive cleaning agents such as mineral oils or petrol when working on the safety
edge.
NOTICE
On the drum wall edges of the system and on the lower and outer turnstile profiles of the turn-
stile wings, vertical and horizontal safety bars made of soft rubber are mounted in the direc-
tion of rotation. When a safety bar is actuated, the turnstile stops turning immediately.
When the safety bar is no longer actuated, the turnstile resumes turning.
3.5
Options
3.5.1
Disabled button
If the disabled button is pressed in the AUTOMATIC or ONEWAY operating mode, the turn-
stile will start and rotate 360° plus an additional segment, at slow speed.
The motion detectors (if available) will be disabled during this time.
In the operating mode CONTINOUS the turnstile rotates a slow speed. If a disabled button is
pressed, the slow speed will be maintained.
NOTICE
If the detection area of a motion detector is entered without pressing a disabled button, the
turnstile will accelerate to walking speed.
3.5.2
Key pivot contact (SSK)
When the key pivot contact is activated (see “Safety and operating components legend”), the
turnstile starts and rotates a minimum of 360° in all operating modes except for MANUAL
mode.
In the MANUAL mode or when the emergency stop switch is activated, the turnstile can only
be rotated manually, with the exception of subfloor system with a geared drive.
In the LOCKED mode the turnstile will automatically lock again (if an electric lock is avail-
able).
Or – on-site code card reader (CKL)
