manualshive.com logo in svg

Record K21, Руководство пользователя, Страница: 28 / 44

Поделиться
Скачать
Record K21 Скачать руководство пользователя страница 28

5

Operation

28 / 44

BAL_K21_EN_3V3_BLA_121-006423019

NOTICE

A reduced opening width is also available in the operating modes ONE WAY and PERA-
MENTLY OPEN.

NOTICE

Exiting the sliding door operation and resuming the revolving door operation is done by se-
lecting the desired revolving door operation on the control unit BDE-D-KTA. It does not matter
what position the wings of the sliding doors are currently in. The sliding doors will automatic-
ally close, if still open, before the revolving door starts to rotate.

5.3

Lock control unit via key panel

CAUTION

Dangerous situation through one-time opening of the sliding door while the revolving door is
in operation

Injuries and/or damages

a) The lock on the control unit of the sliding door must always be on when the revolving door is in

operation!

Locking the control unit

Press key sequence

Symbol

Description

– The control panel keys are locked.

– It is difficult to manipulate the control unit.

– The status of the lock is shown on the BDE-D display.

Unlocking the control unit

Press key sequence

Symbol

Description

– The control panel keys are activated.

– Free selection of operating modes and special functions

are available.

5.4

Operation lock via key switch

Locking the control unit

The key switch is used to unlock or block the BDE-D-KTA control unit for the
revolving door. Only a specific group of people are entitled to lock or unlock as
well as operate the revolving door.

Содержание K21













































Отзывы:

Нет отзывов