Servicing and maintenance
6
BAL_FlowControl_EN_1V3_REC_121-006454644
25 / 28
6.2
Monthly inspection work to be carried out by the operating company
The monthly inspection and maintenance of individual components by the operator requires little time
and serves the reliable function, increased service life and operational safety of the installation.
Test / inspection
Procedure
Expected result
Sensors and LED strips
– Walk towards the door at normal
speed (from the inside and out-
side).
– If necessary, clean the sensors
and LED strips.
–
Please note:
Moisture condensa-
tion on the sensor, due to the es-
cape of warm, moist internal air
and condensation on the colder
external motion sensor, can pre-
vent the door from closing. Dehu-
midify the interior air or wipe the
outer sensor dry if necessary.
– The sensor must cover the entire
passage width.
– LED strips indicate the correct
status.
– The door is opened at an early
stage and at an appropriate
speed to allow unhindered pas-
sage.