Record FlowControl, Руководство пользователя, Страница: 22 / 28

5
Operation
22 / 28 BAL_FlowControl_EN_1V3_REC_121-006454644
5.11 Setting the LED Strips
The flashing of the LED strips can be activated and adjusted in
the Parameter / Signalisation menu. The blinking occurs when the
counter reaches the set limit.
blink duration
blink interval
signalisation
LED blinking
Activate / deactivate door control
Path Selection Description
Parameter off – If the function is activated, the door is auto-
matically deactivated when the person limit
is reached.
– If the function is deactivated, the door is not
deactivated when the person limit is
reached.
→ Signalisation on
→ → Door control
Activate / deactivate LED display
Path Selection Description
Parameter off – When the function is activated, the LED
strips and the counting function are active.
– If the function is deactivated, only the count-
ing function is active.
→ Signalisation on
→ → LED output
Activate / deactivate flashing function
Path Selection Description
Parameter off – If the flashing function is activated, the LED
strips flash when the counter reaches the
set limit.
→ Signalisation on
→ → LED blinking
Setting the flashing time of the LED strips
Path Selection Description
Parameter n/a – Duration, how long the LEDs blink until the
next constant illumination
– Unit seconds.
→ Signalisation
→ → Blink duration
Set flashing interval of LED strips
Path Selection Description
Parameter n/a – Setting the blinking frequency (speed of
blinking).
– Unit Milliseconds.
→ Signalisation
→ → Blink Interval