REBOTEC /
BA-Nr.: 02.07.086/2022-05-A01
- 10 -
EN
Fault
Potential cause
Remedy
Turning the
wheel is stiff
Deposits
Cleaning
Wheel does
not turn
General defect
see mainte-
nance!
Uneven run-
ning of the
wheel
Severe uneven
tread wear
see mainte-
nance!
Chair frame
too unstable
Screw connections
too loose
Screw con-
nections:
Tighten
frame,
wheel in-
serts
Wheel insert
bent/dis-
torted
Hitting an obstacle
see mainte-
nance!
13 Care and maintenance
13.1 Cleaning and care
•
The product can be cleaned using a
mild conventional cleaning and disinfecting
agent. After cleaning, wipe the product with a
clean, moist cloth and then wipe it dry with a dry
cloth.
•
Do not use scouring agents or cleaning agents
with aggressive ingredients (acids, thinners), as
well as hard cleaning objects (brushes), as other-
wise the surfaces may be damaged, or deposits
may form on the materials.
•
The product is suitable for manual cleaning and
disinfection. Please observe the reprocessing in-
structions (02.12.156).
13.2 Maintenance
•
Wear and tear that is not recognised in time and/or
improper handling, as well as irregular or no
maintenance may result in accidents.
For safety reasons, the product must be
professionally maintained at least once a
year.
•
Check product for visible damage (cracks, breaks,
loose parts)
•
Check stability before use
Maintenance/inspection scope
•
Maintenance should include the following inspec-
tion work and should be documented.
•
All bolted connections for tightness (especially the
wheel inserts and the frame)
•
Function of the armrests and locking bolts
•
Function of the footrest (replace defective foot-
rests)
•
Running characteristics and tread of the wheels
(replace defective wheels)
•
Function of the parking brakes (replace defective
brakes)
•
Inspect accessories for deficiencies
Repair
•
If you have any questions concerning the mainte-
nance of the chair, please contact an authorised
dealer or a medical and healthcare supplies store.
•
In the event of damage and/or repairs, contact
your authorised dealer immediately.
•
Never
make
any
unauthorised modifications or
conversions to the chair. These will only adversely
affect the safety and functioning of the chair.
•
Only use OEM spare parts by the manufacturer
REBOTEC for repairs. Observe all guarantee and
warranty information.
•
After maintenance or repair work has been carried
out we recommend you clean the device for hy-
gienic reasons before using it again.
•
Follow all the instructions for ordering spare parts,
reuse and the lifetime.
For documenting the maintenance and re-
pair work, REBOTEC provides a Mainte-
nance Report.
The operating instructions
and maintenance log can be ordered or viewed via
www.rebotec.de. There, it is also possible to
print the information and read it when needed
