Reason MaschineRMikroMK3, Руководство по началу работы

Страница: 39 / 50

B. Controlling the Channel Strip
www.retouchcontrol.com Maschine R - Getting Started Guide 39
Keep pressing the “ Mixer ” button until the
“Chan Mode” screen appears on the virtual
display. The channel compressor parameter
bank is selected by default. The name of the
currently selected channel is displayed in the
upper left corner of the right display.
+
To change to another parameter bank, press the
“
Select ” button and hit pads 9 to 16 (shown in
green ).
To change which channel is selected for editing,
press “
Select ” and hit pads 1 or 2 to advance by
one channel to the left or the right respectively.
To advance by 8 channels, hits pads
3 or 4 to
move to the left or the right respectively (show in
orange ).