RealMan (Beijing) Intelligent Technology Co., Ltd.
50
record the information of the current point, and then select “Add-to-Before” or “Add-
to-After” to add the newly set programmable point to the front or back of the specified
position in the project content display area.
Fig. 8-29 The manual setting of a programmable point.
8.3.8 Insert Points Before the Current
After recording the programmable points manually or automatically, clicking the
button will insert the newly created points before the current
selection.
Demo:
Insert a programmable point before “point2”
1.
Select point2.
2.
Select MOVEL as the control method.
3.
Name the inserted new programmable point as “new”.
4.
Click “Record Current Point” button.
5.
Click the “Add-to-Before” button, and then the newly added point can be seen at
the display area.