Real Good Toys SE-JM 401 Скачать руководство пользователя страница 1

Instructions for 

Real Good Toys’

 Kit #SE-JM 401

©09/17

Congratulations on your choice of a Real Good Toys product.  Your kit has been precision made with meticulous care by 

our craftspeople using carefully selected materials.  This Dollhouse will last for years, even generations, if heirloom care 

and attention is given during assembly.  Take your time and read the instructions completely.  If you have questions, ask 

the experts at your local Dollhouse store or at [email protected]

Measure and identify the parts

:  

The kit is packed in groupings 

that protect the parts, and that is how the Parts List is organized.  As 

you measure and identify the parts, label them with sticky notes us-

ing the names from the parts list, and check them off the parts list so 

you know you have everything.  Taking the time now to identify and 

organize the parts also makes them familiar so you will understand 

what the instructions intend as you read ahead.

• Plan ahead so you know where you are going

• Read ahead so you know how to get there

• Paint ahead so the parts will be ready when you need them

Before you begin - 

You have already opened the 

box and see all the parts organized in boxes and 

bundles.  For the moment, keep them that way.  

There are important things to do before you open 

your glue bottle.

Choose your color scheme

.  

Look at houses in 

your community, models in your local Dollhouse 

shop or at our website: realgoodtoys.com; look 

at plan books from a paint store or architectural 

books at your library (a favorite is: Painted Ladies 

by Michael Larsen and Elizabeth Pomada).  You 

will be painting some of the parts right away so 

get the paint now.  Choose high-quality semi-gloss 

latex enamel paints for ease of use and durability.

Prepare your space

:  

This dollhouse will spread 

out over a large area while it is being built.  You 

will need a large flat tabletop for the house, sev

-

eral boxes to keep parts organized until they are 

needed, and several trays lined with waxed paper 

for holding small parts like windows and shutters.  

A snap-lid box will keep your tools and supplies 

handy between building sessions.

Real Good Toys 

 122 Gallison Hill Rd 

 Montpelier, VT 05602 

 802 262-6018 

 www.realgoodtoys.com

The

 

Special Edition 

Vermont Farmhouse

, Jr.

 

Tools and Supplies:

   

Tape measure or ruler,  Pencil, Sticky notes

 (like PostIts®)

White glue

 (like Aleene’s Tacky Glue®) 

for all construction

Solvent-based Panel Cement

 

for shingles

Masking tape,  Utility knife or coarse file

Fine tooth saw (razor saw

 (like X-Acto®) 

or a hacksaw)

Painting Supplies,  Sandpaper

 (especially 320gr)  

Waxed paper

PostIts

®

, Aleene’s

®

, and X-Acto

®

 are registered trademarks of their manufacturers 

and have no affiliation with Real Good Toys

Not suitable for children under 13 years of age

California 93120 compliant for formaldehyde phase 2

www.realgoodtoys.help

Содержание SE-JM 401























Отзывы: