Real Good Toys Colonial Addition Скачать руководство пользователя страница 1

Instructions for 

Real Good Toys’

the 

Colonial Addition

 Special Edition Kit #JM-44

©09/17

Congratulations on your choice of a Real Good Toys product.  Your kit has been precision made with meticulous 

care by our craftspeople using carefully selected materials.  This Dollhouse will last for years, even generations, 

if heirloom care and attention is given during assembly.  Take your time and read the instructions completely.  

If you have questions, ask the experts at your local Dollhouse Store or at [email protected]

Measure and identify the parts

:  

The kit is packed in 

groupings that protect the parts, and that is how the Parts 

List is organized.  As you measure and identify the parts, 

label them with sticky notes using the names from the parts 

list, and check them off the parts list so you know you have 

everything.  

Taking the time now to identify and organize 

the parts also makes them familiar so you will understand 

what the instructions intend

 

as you read ahead.

• Plan ahead so you know where you are going

• Read ahead so you know how to get there

• Paint ahead so the parts will be ready when you need them

Prepare your space

:  

This dollhouse will spread out 

over a large area while it is being built.  You will need 

a large flat tabletop for the house, several boxes to keep 

parts organized until they are needed, and several trays 

lined with waxed paper for holding small parts while 

they are being painted.  

A snap-lid box will keep your tools and supplies handy 

between building sessions.

Preview the Overview

 (page 3) to plan and organize 

your build; this helps make it fun and fulfilling.

Real Good Toys 

 122 Gallison Hill Road 

 Montpelier, VT 05602 

 802 479-2217 

 www.realgoodtoys.com

Supplies:      

Tape measure or ruler,  Pencil, Sticky notes

 (like PostIts®)

Paint:

 Interior semi-gloss latex paint... Everything gets at least one coat before assembly -  get the paint now. 

Paintbrushes

 1” or 2” foam brushes for each color, 3” foam roller for interior painting

Sandpaper: 

320 grit, 3-5 sheets

Glue: 

Aleene’s Tacky Glue for the dollhouse 

Masking tape:

 ¾” or 1” 

Wiring:

 it’s easiest to install some parts during assembly… order wiring supplies now.  

Wallpaper paste:

 Roman’s “Border” Paste

Waxed paper

PostIts

®

, Aleene’s

®

, and X-Acto

®

 are registered trademarks of their manufacturers 

and have no affiliation with Real Good Toys

Before you begin - 

You have already opened the box and see all the parts organized in boxes and bundles.  

For the moment, keep them that way.  There are important things to do before you open your glue bottle.

Not suitable for children under 13 years of age

California 93120 compliant for formaldehyde phase 2

JM401 and JM44 Addition

Each sold separately

Содержание Colonial Addition















Отзывы: