REA ScanCheck 3n Скачать руководство пользователя | Manualshive

Страница: 106 / 116

background image

Operating Manual

Page 106 / 116

Copyright © REA Elektronik

REA ScanCheck 3n

V 1.2.0 24/02/2020

REA

VERIFIER

7 Terms of guarantee

REA Elektronik GmbH guarantees that the devices supplied are free from material and
production defects. This guarantee shall be valid for 12 months from the date of shipment, but
shall be rendered invalid in cases of incorrect installation, improper use or damage to the
device, irrespective of whether it occurred inadvertently or due to negligence.

Repair under guarantee

If the purchased device does not work flawlessly within the guarantee period stated above,
REA Elektronik GmbH will repair it free of charge. To avoid unnecessary costs, we ask you to
carefully check all information in the user manual before concluding that the device is
defective or does not work flawlessly.

Return of the device

In the event that the device needs to be returned for repairs, the device case it came with or
the shipping carton should be used to return the device. The original shipping carton contains
transport protection. If this is not used, the device will be damaged in transit.
The sender shall bear any expenses when returning the device. The shipment is to be insured
for the value of the device. Following the repair under guarantee, REA Elektronik GmbH or the
respective representative will return the device to the address of the sender free of charge.
Express deliveries can be arranged on request. The additional costs incurred will always be
invoiced on a time and materials basis.
An RMA No. must be requested from REA before returning the device. For this purpose, the
S/N of the device must be provided.

Customer service after the expiration of the guarantee period

Please contact REA Elektronik GmbH or the representative for your area for more information.
You can find a document on the REA website that provides the status of the devices.
Discontinued devices cease to be covered by the repair support service after a certain period
of time, which is detailed in the aforementioned document.

General guarantee terms

REA Elektronik GmbH shall not be liable for any indirect, incidental or consequential
damages, including damages resulting in loss of profit or production downtime, delivery
delays, material losses, increased operating or business costs or similar.
The general terms and conditions of business of the manufacturer REA Elektronik GmbH shall
apply in addition to these regulations.
Subject to technical alterations.

REA Elektronik GmbH



64367 Mühltal, Germany

«
...
104
105
106
107
108
...
»

Содержание ScanCheck 3n





















































































































Отзывы:

Нет отзывов

Похожие инструкции для ScanCheck 3n

Бренд: Leuze Страницы: 92

Бренд: Code Страницы: 2

Бренд: IDEC Страницы: 39

Бренд: RIOTEC Страницы: 4

Бренд: TSYS Страницы: 83

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 3

Бренд: Sony Страницы: 242

Бренд: Sony Страницы: 263

Бренд: TSC Страницы: 33

Бренд: TSC Страницы: 50

TTP-2610MT Series

Бренд: TSC Страницы: 68

Бренд: Tecknet Страницы: 4

Бренд: Jinke Страницы: 13

Бренд: Elvox Страницы: 20

Signature GD45 Series

Бренд: dtm Страницы: 2

UNIVERSAL MENU BOOK

Бренд: Opticon Страницы: 151

Бренд: IDTECK Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды