RSC-900 System Components
(included in all kits):
1 – Communication hub
(Ethernet or Wi-Fi)
2 – AA batteries (hub)
1 – Ethernet cable
(Ethernet models only)
1 – 110V plug (hub)
2 – Water flood sensors
4 – AAA batteries (sensors)
RSC-900-AW kits:
1 – Valve
1 – Actuator
4 – CR123A (3V) batteries
(actuator)
1 – Long parallel mounting
adaptor (valve/actuator)
1 – Short perpendicular
mounting adaptor
(valve/actuator)
1 – Emergency key
(valve/actuator)
RSC-900 Series
Quick-Start Guide
NEED INSTALLATION OR SETUP ASSISTANCE?
Call toll-free: 888-771-4929
Or visit www.RelianceDetection.com/support/RSC-900
RSC-900 leak detection systems with shut-off valves
should be installed by an authorized plumber. Hub and
sensors are for interior use only. The valve/actuator may be
installed on the exterior of the building, if necessary and as the local
climate allows. When considering exterior installation, be sure the
actuator would not be immersed in water for more than 30 minutes and
immersed in water deeper than 3’. Do not install any components inside
a metal cabinet.
RSC-900 Wireless System FCC & Industry Canada Information
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Communication hub: IP Rating IEC60529
Valve/actuator: IP Rating IEC60529; IP68, ANSI61, Annex G (valve)
Certifications:
FCC
IC
Flood Sensor RSC-900-W-001 2AFOICLMFLD10
20798-CLMFLD10
Hub RSC-900-X-650
2AFOICLMCTRL10
20798-CLMCTRL10
Hub RSC-900-X-800
2AFOICLMCTRL10
20798-CLMCTRL10
Actuator RSC-900-W-310
2AFOICLMASOU20
20798-CLMASOU20
