Installation Steps
1. Mount Illuminator
2. Connect Illuminator to low voltage
power supply
– Input 12-24V DC/ 24V AC
Optional Set-up (if required)
3. Adjust Power to alter light intensity
4. Adjust Photocell sensitivity
5. Photocell following contact and
Telemetry input
Set Up Steps
1. Position illuminator adjacent to
camera and point towards scene
2. Adjust vertical and horizontal
position of lamp to ensure full field
of view illuminated
3. Tighten all fixings
Package Contents
1. Illuminator including mounting
bracket
Installation Guide
Overview
This installation guide provides instructions for installing the NIR series
illuminators
PLEASE NOTE
:
Ensure operating voltage is
correct for unit being installed
(12-24V DC/ 24V AC)
Version: 1