RDC6585PC Control System manual
V1.0
SHENZHEN RUIDA TECHNOLOGY
34
the "up/down" key to select other layers, and then press the
<Enter>
key to exit the layer selection
mode. Then press the "up/down" key to move the "selection block" to the layer parameter entry to
be modified. Press the number key and the backspace key to set and modify the parameters. After
setting the parameters, move the "selection block" to the "write parameters" entry. Press the
<Enter>
key to save the current layer parameters, otherwise the parameters will not be saved. Press
the
<Esc>
key interface to disappear and return to the main interface.
8.4 Menu Function
Push the
< Menu>
key when the screen is on the main interface, it will show as below:
Press the
<Esc>
key to return to the previous menu.
8.4.1 Focusing
In the menu interface, select "Focusing" entry and press the
<Enter>
key ,
Automatically find focus.
8.4.2 Max/Min Power Setting
In the menu interface, select "Power" entry and press the
<Enter>
key ,it will show as below:
Figure 8.5
