RDC6585PC Control System manual
V1.0
SHENZHEN RUIDA TECHNOLOGY
31
Digital key 0~9
：
Used to set parameters. The key with the character in the upper
right corner can be combined with the
<Shift>
key, and pressed to control the A, B, C, D
axis, and so on.
8.1.3 The main interface
When the system is powered on, the screen will show as below:
Graph Display Area: To display the whole file
’
s track, and display the running track.
Running parameters: To display the running file
’
s file number, speed, max power etc..
Coordinate: To display the current coordinate of X,Y and Z axes.
Graph layer parameters: To display the layers
’
information of the current file, such as
max or min power, speed etc.. When system is idle, dblclick the layer, then users can change
the layer
’
s parameters and the changing would be saved.
Running Status: To display the current status of the machine, such as Idle, Run, Pause,
Finish, etc..
Running Progress Bar: To display the progress bar of the current running file.
Working Number: To accumulate the work number of the current file.
File Dimension: To display the dimension of the current file.
Net status: To display the connecting status of the Ethernet. When the network
connection is successful, the icon
is displayed,otherwise the icon
is displayed.
Figure
8.1.3
