Building the RCRCM MiniVec
Congratulations on purchasing an RCRCM MiniVec. Firstly, let’s make sure that you
have all the right parts with your model.
Check list:
Fuselage, RH wing, LH wing, RH stabiliser, LH stabiliser
Wing joiner, carbon tail joiner, steel tail joiner
Clevis x 7, pushrod x 4, pushrod coupler x 3
Servo covers x 4
Radio tray.
Radio gear that you will need:
Battery – we recommend the 2/3A size in 4.8V for this model.
Wing servos – Hitec HS125MG; Hyperion DS11AMB; Hyperion DS095FMD; or
similar. Hyperion DS095FMD recommended.
Fuselage servos – Hitec 65MG; Savox 255MG. Savox 255MG recommended.
Adhesives and tools you will need:
Thick CA
30 minute epoxy
Microballoons
Epoxy thickener (this could be Cabosil, Thixotropic Silica, Milled Glass, or cotton
flocks)
Soldering iron
1.6mm drill bit (if using thread L bend wing linkages only)
