Here, be sure to remove Egg Van power cord only.
Be careful not to take off power cord of incubator.
In case of altricial birds such as parrots or wild birds, you'd better to turn the eggs once or
twice additionally by your hand.
Turning stop During Incubation
▶
Before 3 days of hatching, disassemble the incubator
from EGG VAN, and place on flat surface for stopping
egg turning. After that, you'd better to remove Divider.
▶
When incubating various species of eggs at the same
time, you can move the eggs before three days of
hatching to other brooder for easy and clean management.
(You can operate two incubators, and various incubators or brooders are available from
Rcom website .)
PUMP PO
WER
POWER INLET
PUM
P P
OW
ER
POWE
R IN
LET
OUT
IN
Pump Power
Power Cord
Incubation Termination
▶
Just take off the power cord after hatching.
▶
It is not necessary to do Incubator
Initialization with KING SURO 20 incubator
after hatching. Just connect power again
when you want to start incubation again.
※
There is no specified ON or OFF button
on the incubator.
Incubator Initialization
Calibrated setting value will not be initialized with
this function.
[If you need to initialize calibrated setting,
refer to FACTORY SETTING next page.]
▶
This function can be used when user input
wrong setting, or incubation termination.
▶
Press and button at the same time
for about 5sec. then display will show "rSt" and
incubator returns to default setting.
18
DIGITAL INCUBATOR
3.
Incubation
(2) Incubation Start / How to Stop Egg Turning /
Incubation Termination / 4.(1) Incubator Initialization
3.
Incubation
(2) Incubation Start / How to Stop Egg Turning /
Incubation Termination / 4.(1) Incubator Initialization
5sec.
USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Incubator Hatcher Rcom King suro MX20 User Manual
