RCH Walle Mec, Руководство по эксплуатации

Страница: 51 / 70

51
8 READINGS
– X MODALITY (PARSKATS)
To read the statistics of the sales, both daily and periodic sales apply
position in mode X by entering 2 and KEY .
In X mode , press the key [IZN] to access the circular menu and to see,
one by one, said items. If we are interested, once the item in is
displayed, press [SK.NAUDA] to print the report.
To exit the menu, press the key [ATM].
8.1 DAILY READING
In reading mode “
X
” slide the menu with the key [IZN] until “
Daily
Report
“ is displayed, then press [SK.NAUDA].
WALL E MEC prints the following data in the same layout of the Daily
Report:

Reading of the net daily sales and rate VAT

Reading of any decrease and increase (by value and percentage)

Reading of Cancellations, Void, and Refund

Reading of data (number of daily report and receipts)
Note: It is possible have a few statistic reports printed before these data.
To enable the printout, please refer to chapter 6.7.