RCA RC5500P, Руководство пользователя

Страница: 67 / 72

Reference 65
DVD Problem Solution
Subtitle and/or audio If the subtitle and/or audio language does not exist on the disc, the
language is not the one initial settings will not be seen/heard. The disc’s priority language is selected
selected from the instead. Set the subtitle and or audio language initial setting manually.
initial setting
No on-screen display The OFF setting is selected for OSD Display; select ON in the Setup menu.
The menu is displayed in a The Menu Language preference is set to that language. Go to the
a foreign language Setup menu and select the language you prefer. Set the Start Up Language menu
to ON to have the player remember the language you selected.
Play doesn’t begin when The rating level has been set and the disc is subject to that restriction.
a title is selected
No forward or reverse scan Some DVDs have sections that prohibit rapid scanning.
Disc won’t play Both the player and the DVD is coded by region. If the regional codes don’t
match, the disc cannot be played. This player is Code 1.
Desired angle cannot be changed Some DVDs do not have the multi-camera angle system, and some discs have it
only on certain portions.
Picture is not displayed Make sure the TV SCREEN feature in the Setup menu is set correctly for your
with correct aspect ratio television.
Forgot Rating Limit Password With the power on, press and hold the SKIP REV, PAUSE, and POWER buttons on
the player. This resets the password feature and all other settings to the initial
factory settings. INITIALIZED appears on the TV screen. You may be required to
select a menu language the next time you power up.
Cannot copy discs to video tape This player is equipped with anticopy protection.
Troubleshooting
Troubleshooting
Self-Diagnostic Message Solution
U 11
The disc is dirty. Wipe the discs with a soft cloth.
H
When you see a code that begins with “H”, it means that the unit
is not functioning properly. Turn the unit off and on again by pressing
POWER twice or unplug the AC power cord from the wall outlet,
and then plug the unit back in. This will make the unit operate
normally if external electrical influences such as lightning or static
electricity have affected the operation of the unit.