5
Graphics are for representation only. Your unit may differ slightly.
Connections and Setup
Connecting Your DVD Player to an Audio System
If you want to use an audio source like an amplifier or audio system and TV, follow the
illustration below. Use the audio/video cables.
1 POWER switch:
Turns the DVD player on and off.
2 FULL indicator:
Lights green when the battery is fully charged.
3 CHARGE indicator:
Lights red when the battery is being charged.
4 STANDBY indicator:
Flashes when the DVD player is turned off; the DVD player is still
receiving some power.
5 Remote sensor:
Accepts the remote control signal.
6 OPEN:
Opens the disc compartment.
Buttons, Jacks, and Control
Front View (from left to right)
AUDIO
CABLE
VIDEO
CABLE
Micro System
with AUX IN
TV
Note: Remember to turn your TV on and
tune it to the Input channel on the TV to
view the video from the DVD player.
Connecting the DVD Player to the Car Cigarette Lighter
Make sure the car and the player are turned off before connecting the player to the cigarette
lighter. Using a car adapter, connect the socket end of the car adapter to the cigarette lighter and
the other end of the adapter to the DC IN connector on the player.
Note: To prevent the car’s battery from discharging, disconnect the DC power cord from the cigarette lighter
socket when not in use.
Book 1.indb 5
Book 1.indb 5
4/29/05 10:04:28 AM
4/29/05 10:04:28 AM
