1.
OPEN/CLOSE Button
Press to open or close the disc tray.
2. STANDBY/ON Button
Press to turn on the unit or put it in standby
mode
3. AUDIO Button
Press to select one of the audio sound
tracks programmed on a DVD or to select
the audio output mode on an audio CD.
4. ANGLE Button
Press to switch the camera angle of the
video presentation when scenes with
multiple camera angles are recorded on a
DVD.
5. MEMORY Button
Press to create programs.
6. DISPLAY Button
Press to change disc status information
displayed on the TV screen.
7. SETUP Button
Press to open and close the SETUP menu
screen
8. CURSOR ( , , , ) Button
Press to highlight selections on a menu
screen and adjust certain settings.
OK Button
Press to confirm selections on a menu
screen.
9. CLEAR Button
Clear input selections and cancel certain
playback functions.
10.
PLAY Button
Press to start playback.
11.
STOP Button
Press to stop playback.
12.
SEARCH Button
Fast reverse playback.
13.
REV Button
Press to move backwards through titles,
chapters or tracks on a disc.
14. Number (0-9) Buttons
15. A-B REPEAT Button
Press to perform point-to-point repeat
playback on a DVD or CD.
16. GOTO Button
Press to skip directly to a specific location
on a DVD.
17. SUBTITLE Button
Press to select one of the subtitle languages
programmed on a DVD.
18. ZOOM Button
Zoom in an image.
19. RETURN Button
20. TITLE Button
Press to open the title menu screen.
21. MENU Button
Press to open and close the DVD’s menu.
22. HDMI Button
Press to change the video output signals in
stop mode.
23.
PAUSE Button
Press to pause playback.
24.
SEARCH Button
Fast forward playback.
25.
NEXT Button
Press to move forward through titles,
chapters or tracks on a disc.
26. SLOW Button
Press to perform slow forward playback of
DVDs.
27. STEP Button
Press to advance frame by frame.
28. DISC REPEAT Button
Press to repeat chapter or title of a DVD.
Press to repeat single track or whole CD.
1.
Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
9.
Do not defeat the safety purpose of the
polarized or grounding - type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong is
provided for your safety. When the provided
plug does not fit into your AC power outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the AC power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11. Only
use
attachments/accessories
specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as the AC power cord or plug is
damaged, liquid has spilled or objects have
fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY
INSTRUCTIONS
DISC FoRmATS
Region Management Information
This unit is designed and manufactured to
respond to the Region Management Information
that is encoded on DVDs. If the region number
printed on the DVD does not correspond to the
region number of this unit, it cannot play that
disc.
The region number of this unit is 1.
Disc Function or Operation that is Not
Available
When the
appears on the screen, it indicates
that the function or operation attempted is not
available at that time. This occurs because the
DVD manufacturer determines the specific
functions of DVDs. Certain functions may not
be available on some DVDs. Be sure to read the
documentation provided with the DVD.
Icons Used on DVDs
Sample lcons
Note: When playing back a CD-G (Graphics) or
CD EXTRA disc, the audio portion will be played,
but the graphic images will not be shown.
Title, Chapter and Tracks
• DVDs are divided into
“titles”
and
“chapters”
. If the disc has more than one
movie on it, each movie would be a separate
“title”
.
“Chapters”
are sections of titles.
• Audio CDs are divided into
“tracks”
. A
“track”
is usually one song on an Audio CD.
Note:
Numbers identify each title, chapter, and track on
a disc. Most discs have these numbers recorded
on them, but some do not.
The unit can playback:
Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
SoUND SYSTEm
Dolby Digital
Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital
can reproduce from one to 5.1 discrete channels of excellent quality audio.
The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for
two-channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete
multi-channel soundtracks available on many DVDs.
Manufactured under license from Dolby Laboratories.
‘Dolby’ and the double-D symbol are trademarks of Dolby Laboratories.
ACCESSoRIES
Please check and identify the supplied accessories.
• To order accessories visit web site http://www.RCAav.com
Remote Control .......................................................................................................... x 1
2xAAA batteries .......................................................................................................... x 1
AV cable ...................................................................................................................... x 1
CoNTRoL REFERENCE GUIDE
Remote Control
Using the Remote Control
• Point the remote control at the REMOTE
SENSOR located on the unit.
• When using this unit in very bright light, the
infrared REMOTE CONTROL SENSOR may
not work properly.
• The recommended effective distance
for remote operation is about 16 feet (5
meters).
Battery Replacement
When the batteries become weak, the operating
distance of the remote control will be greatly
reduced and you will need to replace the
batteries.
Notes:
• If the remote control is not going to be used
for a long time, remove the batteries to
avoid damage caused by battery leakage
corrosion.
• When discarding batteries, environmental
problems must be considered and local
rules or laws governing the disposal of these
batteries must be strictly followed.
WARNING:
• Do not dispose of the battery in fire or it may
explode or leak.
• Batteries shall not be exposed to excessive
heat such as sunshine, fire or the like.
CAUTION:
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
REmoTE CoNTRoL
DVDs
[8cm/12cm disc]
Audio CDs
[8cm/12cm disc]
Compatible
Unit
1. STANDBY/ON Button
Turn the unit on or put it in standby mode.
2. Power Indicator
Indicator On: The unit is in standby mode.
Indicator Off: The unit is turned on.
3. DISC TRAY
Opens or closes the tray by pressing the
OPEN/CLOSE button.
4. REMOTE SENSOR
Receives the remote control unit signals.
5. DISPLAY LENS
Display units information.
6. OPEN/CLOSE Button
Opens or closes the tray.
7. PLAY Button
Starts or resumes playback of a disc.
8. STOP Button
Stop playing a disc.
9. OPTICAL OUT jack
10. HDMI OUT jack
11. VIDEO OUT jack
12. DIGITAL COAXIAL OUT jack
13. LEFT/RIGHT AUDIO OUT jacks
SYMPTOM CAUSE (AND REMEDY)
• Ensure the AC power cord is connected.
• The unit is not turned on.
• Remove any obstacles between the remote and the unit
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace the batteries in the remote with new one.
• Make sure that you select ON mode.
• The system is in pause mode. Press the
PLAY
button to return to
normal play mode.
• The unit is in fast-forward or fast-reverse mode. Press the
PLAY
button
to return to normal play mode.
• Make sure the AUDIO output is correct.
• Make sure the audio cable is connected securely.
• The region number of the disc doesn’t match the region number of this
unit.
• The TV is not set to receive DVD signal output.
• The video/HDMI cable is not connected securely.
• The TV is not turned on.
• Clean the disc.
• Check connection between HDMI TV and the unit.
• Replace the HDMI cable with a better one. Bad HDMI cable can cause
data lost.
• Press HDMI key on remote handset several times to toggle among different
HD OUTPUT.
• Check the connections.
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened
with alcohol.
• Clean the disc.
• There is no disc inside. (“No Disc” appears on the screen).
• Insert the disc correctly with the playback side facing down.
• Clean the disc.
• The unit and disc region number are incompatible.
• Condensation may have formed inside the unit due to a sudden change in
temperature. Wait about an hour for it to clear and try again.
• Reset the unit, press the STANDBY/ON button to turn off the unit, wait for
a few seconds, then restart the unit.
No power.
The remote control
does not function.
No sound or only a
very low-level sound
is heard.
No
picture
or
abnormal color.
No output on your
HDMI TV.
Severe hum or noise
is heard.
The disc does not
play.
The
DVD
door
cannot open.
TRoUbLESHooTING GUIDE
SAFETY PRECAUTIoNS
The lightning flash with an arrowhead
symbol, within the equilateral triangle, is
intended to alert the user to the presence of
uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to cause an electric shock.
The exclamation point within the equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in this
user manual.
CAUTION
INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
On Placement
• Do not use the unit in places that are
extremely hot, cold, dusty, or humid.
• The ventilation should not be impeded by
covering the ventilation openings with items
such as newspaper, table-cloths, curtains,
etc.
On Safety
• When connecting or disconnecting the AC
power cord, grip the plug and not the cord
itself. Pulling the cord may damage it and
create a hazard.
• When you are not going to use the unit for a
long period of time, disconnect the AC power
cord.
• No naked flame sources such as lighted
candles should be placed on the AC power
cord and the unit.
• Leave a minimum of 10 cm around the
apparatus for ventilation.
• Attention should be drawn to the environmental
aspects of battery disposal.
• Use of apparatus in moderate climates.
On Condensation
• When left in a heated room where it is warm
and damp, water droplets or condensation
may form inside the unit. When there is
condensation inside the unit, the unit may
not function normally. Let the unit stand for
1 to 2 hours before turning the power on, or
gradually heat the room and let the unit dry
before use.
Rating Plate Location
• The rating plate is located on the back of unit.
FCC Statements
NOTE: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/
TV technician for help.
Shielded cables must be used with this unit to
ensure compliance with the Class FCC limits.
Warning:
Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
• Should any trouble occur, disconnect the AC power cord and refer servicing to a
qualified technician.
• Main plug is used as the disconnect device, it shall remain readily operable and
should not be obstructed during intended use. To be completely disconnected the
apparatus from supply mains, the main plug of the apparatus shall be disconnected
from the mains socket outlet completely.
WARNING
Notes on Copyright
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, or rent
copyrighted material without permission.
Apparatus Claims of U.S. Patent Nos. 6,836,549;
6,381,747; 7,050,698; 6,516,132; and 5,583,936
licensed for limited viewing uses only.
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
This product
contains a low power
laser device.
User manual
DRC279RE
Notes on Unauthorized Discs
You may not be able to play some DVDs on
this unit, particularly if they were purchased
from outside your geographic area or made
for business purposes.
mAINTENANCE
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out
during playback. Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a
cleaning cloth.
• NEVER use solvents such as benzine or alcohol to clean the disc.
• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause
malfunctions.
Cleaning the Unit
• Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that
has been dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe with a dry
cloth.
• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air
to remove dust.
Important Note
Before transporting the unit, remove the disc from the disc compartment.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING:
THE APPARATUS SHALL NOT BE
EXPOSED TO DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHALL BE PLACED ON APPARATUS.
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE THE
APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION:
DANGER OF EXPLOSION IF BATTERY
IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
CAUTION:
TO REDUCE THE RISK OF FIRE,
DO NOT PLACE ANY HEATING OR COOKING
APPARATUS BENEATH THIS UNIT.
CAUTION:
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF
POWER OUTLET, THEN FULLY INSERT.
The symbol for Class
II (Double Insulation)
Caution Marking and rating plate was located at
rear enclosure of the apparatus.
Portable Cart Warning
2. Insert two AAA size batteries.
1. Open the battery door.
To Change Remote Batteries
1
16
17
19
21
22
23
25
24
20
18
26
27
28
2
4
6
7
9
11
13 12
10
8
5
3
14
15
1
3
2
4
5
6 7 8
To wall outlet
9
10 12 13
11
SETUP AND CoNNECTIoNS
CONNECTING TO A TV
The unit can be connected to your TV in several different
ways, depending on the design of your TV.
Note: Use only one of the below listed connection
method for connecting to your TV.
A. RCA AUDIO/VIDEO JACKS
Use the Audio/Video cable (supplied). Connect the
VIDEO OUT and left/right AUDIO OUT jacks on the unit
to the VIDEO IN and left/right AUDIO IN jacks on your
TV.
TV
red
whit
e
yellow
AV cable
DRC279RE
It is important to read this instruction prior to using your new product for the first time.
Need more help?
Please visit online help at
www.RCAav.com
Specifications and external appearance are subject to change without notice.
Printed in China
811-727991W011
-
1
-
-
2
-
-
3
-
-
4
-
DRC279RE ENG IB.indd 2
4/9/2009 10:30:52
