RCA 25450 Скачать руководство пользователя | Manualshive

Страница: 3 / 124

background image

Interference Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference;

and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de-

signed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).
• Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.
• Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also,

the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This booklet is avail-

able from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies.

Hearing Aid Compatibility

This telephone system meets FCC standards for Hearing Aid Compatibility.

US NUmber iS located oN the cabiNet bottom

reN NUmber iS located oN the cabiNet bottom

Licensing

Licensed under US Patent 6,427,009.

Important Information

«
1
2
3
4
5
...
»

Содержание 25450





























































































































Отзывы:

Нет отзывов

Похожие инструкции для 25450

Бренд: PHOTON Страницы: 48

TRU 5865 Series

Бренд: Uniden Страницы: 60

Бренд: Uniden Страницы: 24

Бренд: Docomo Страницы: 601

Бренд: VoipTel Страницы: 6

Бренд: Savannah Страницы: 9

Бренд: Tala Страницы: 4

Бренд: Swisscom Страницы: 84

Бренд: Blaupunkt Страницы: 17

Бренд: GE Страницы: 72

KXTGA930 - DIGITAL CORDLESS HANDSET INSTALL

Бренд: Panasonic Страницы: 5

Бренд: Qwest Страницы: 38

CooVox U100 Series

Бренд: Zycoo Страницы: 16

Бренд: BT Страницы: 91

Бренд: BT Страницы: 2

Бренд: BT Страницы: 69

Бренд: BT Страницы: 125

Бренд: Audiovox Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды